Danfoss VLT FC 100 Series Programming Manual page 33

®
VLT HVAC Drive Programming Guide
[71] bar
[72] Pa
[73] kPa
[74] m WG
Power:
[80] kW
Flow, volume:
[120] GPM
[121] gal/s
[122] gal/min
[123] gal/h
[124] CFM
[125]
ft 3 /s
[126] ft 3 /min
[127] 3
ft /h
Flow, mass:
[130] lb/s
[131] lb/min
[132] lb/h
Velocity:
[140] ft/s
[141] ft/min
Length:
[145] ft
Temperature:
[160] ° F
Pressure:
[170] psi
[171]
lb/in 2
[172] in WG
[173] ft WG
Power:
[180] HP
0-31 Custom Readout Min Value
Range:
*
0.00 [0 - par. 32]
0-32 Custom Readout Max Value
Range:
*
100.00 [Par. 0-31 - 999999.99 ]
0-37 Display Text 1
Option:
Function:
This parameter allows the choice of the min. value of the custom defined readout (occurs at zero speed). It is
only possible to select a value different to 0 when selecting a linear unit in
Quadratic and Cubic units the minimum value will be 0.
Function:
This parameter sets the max value to be shown when the speed of the motor has reached the set value for
Speed High Limit , (par.4-13/4-14).
Function:
In this parameter it is possible to write an individual text string for display in the LCP or to be read via serial
communication. If to be displayed permanently select Display Text 1 in par. 0-20, par. 0-21, par. 0-22, par. 0-23
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
3. Parameter Description
Custom Readout Unit
, par. 0-30. For
Motor
3
33