About 20 seconds after the LCD initial screen (see Figure 7-3) is on, the Main Screen
2
will appear (see Figure 7-4). After you see the Main Screen, you can operate the
LCD. Please note that the Main Screen appears in the User login status as shown in
UPS-1.1
Power Flow
Power Flow
Summary
System Status
EMS
7.3
ON/ OFF Button
NOTE:
1. The setting of the
2. If you want to change the access setting for the ON/ OFF Button (
After the touch panel is turned on in accordance with the steps stated in 7.2 How to Turn
on the LCD, the Main Screen will appear in the User login status and the ON/ OFF Button
(
) shown in Figure 7-5 will appear.
MEASUREMENT
SETUP
POWER FLOW
Maintenance
Bypass
Bypass
Mains
90 %
5 mins
(Figure 7-4: Main Screen_ User Login)
OFF Button (
) presented in this user manual.
go to
General Setting
SETUP
information, please refer to 7.10.7 General Setting.
User Login
MAINTENANCE
LOG IN
EVENT LOG
User
is set as 'Any User' for all the ON/
User
On/
7-5
7
LCD Display & Settings
10:15
Sep 25,2018
Bypass
Load
30 %
), please
Button Access. For relevant
Need help?
Do you have a question about the Modulon DPH Series and is the answer not in the manual?