On/ Off Button - Delta Modulon DPH Series User Manual

2
About 20 seconds after the LCD initial screen (see
will appear (see
LCD. Please note that the Main Screen appears in the User login status as shown in
UPS-1.1
Power Flow
Power Flow
Summary
System Status
EMS
7.3

ON/ OFF Button

NOTE:
1. The setting of the
2. If you want to change the access setting for the ON/ OFF Button (
After the touch panel is turned on in accordance with the steps stated in
( ) shown in
MEASUREMENT SETUP
POWER FLOW
Maintenance
Bypass
Bypass
Mains
90 %
5 mins
OFF Button ( ) presented in this user manual.
go to General Setting
SETUP
information, please refer to
, the Main Screen will appear in the User login status and the ON/ OFF Button
will appear.
). After you see the Main Screen, you can operate the
User Login
MAINTENANCE LOG IN EVENT LOG
User
User On/
7-5
7 LCD Display & Settings
) is on, the Main Screen
10:15
Sep 25,2018
Bypass
Load
30 %
is set as 'Any User' for all the ON/
Button Access. For relevant
.
), please