Delta Modulon DPH Series User Manual page 124

2
3
4
5
6
Modulon DPH Series
Check if the bypass voltage and STS module are normal or not.
If normal, tap the ON/ OFF Button (
UPS-1.1 MEASUREMENT
Power Flow
Transfer to Bypass without Protection!
If normal, please select 'YES'. After that, the UPS will shut down the inverter and
transfer to run in Bypass mode.
Bypass Switch (Q3).
Switch OFF the Input Switch (Q1), Bypass Switch (Q2) and Output Switch (Q4).
After that, the screen shows as follows.
UPS-1.1 MEASUREMENT
Power Flow
POWER FLOW
Maintenance
Power Flow
Bypass
Bypass
Summary
Mains
System Status
90 %
5 mins
EMS
(Figure 6-16: On-Line Mode to Manual Bypass Mode Screen)
) and the following screen will pop up to
SETUP MAINTENANCE LOG IN
User
POWER OFF ?
No
Yes
SETUP MAINTENANCE LOG IN
User
6-14
10:15
Sep 25,2018
EVENT LOG
On-Line
ON the Manual
10:15
2
Sep 25,2018
WARNING
Standby
Load
0 %