On/ Off Button; Ups-1.1 Measurement - Delta Modulon DPH Series User Manual

UPS-1.1
Power Flow
Power Flow
Summary
System Status
EMS
7.3

ON/ OFF Button

NOTE:
1. The setting of the
OFF Button (
2. If you want to change the access setting for the ON/ OFF Button (
go to
information, please refer to 7.10.7 General Setting.
After the touch panel is turned on in accordance with the steps stated in 7.2 How to Turn
on the LCD, the Main Screen will appear in the User login status and the ON/ OFF Button
( ) shown in Figure 7-5 will appear.
UPS-1.1
Power Flow
Power Flow
Summary
System Status
EMS
(Figure 7-5: Main Screen_ User Login & ON/ OFF Button Location)
MEASUREMENT SETUP MAINTENANCE
POWER FLOW
Maintenance
Bypass
Bypass
Mains
90 %
5 mins
(Figure 7-4: Main Screen_ User Login)
) presented in this user manual.
General Setting
SETUP
MEASUREMENT SETUP MAINTENANCE
POWER FLOW
Maintenance
Bypass
Bypass
Mains
90 %
5 mins
User Login
LOG IN EVENT LOG
User
is set as 'Any User' for all the ON/
User
User Login
LOG IN EVENT LOG
User
7-5
7 LCD Display & Settings
10:15
May 25,2018
Bypass
Load
30 %
), please
Access. For relevant
10:15
May 25,2018
Bypass
ON/ OFF
Button
Load
30 %