Ems - Delta Modulon DPH Series User Manual

7.9.7 EMS

Path 1: Tap the shortcut icon (
Path 2:
MEASUREMENT
To activate the EMS function of the UPS, you have to connect the optional EMS 1000
(EnviroProbe) device(s) with the UPS; the EMS information of each device (ID #) will be
displayed on the EMS
for the descriptions of each item shown on the EMS screen.
Modulon DPH Series
NOTE:
The screen ( )
PAGE
3
use the Delta lithium-ion batteries with the optional multifunctional communication
card (MFC) being installed in the SMART slot shown in Figure 4-13. Please
contact Delta customer service if you need more information.
UPS-1.1 MEASUREMENT
Battery Status
BATTERY STATUS
Cabinet 1
String 1+
Cell 1
Batt. Module 1
Volt. (V) 4.00
SOH 98%
Temp. (°C)
26
Cell 1
Batt. Module 2
Volt. (V)
4.00
SOH 98%
Temp. (°C)
26
After entering the screen shown above, you can use the three drop-down lists in
the upper left corner to choose the Cabinet, String, and Battery Module to view
the corresponding String Voltage, String Current, battery module's SOH (State of
Health) and battery cell's Voltage and Temperature.
NOTE:
1. The items shown on the EMS screen is related to the settings in the (
EMS Setting; the settings can be adjusted according to your needs.
2. For installation of the optional EMS 1000 (EnviroProbe), please refer to 7.9.7.1
Connecting the optional EMS 1000 (EnviroProbe) and the EnviroProbe
1000 Quick Guide attached in the package of the optional EMS 1000
(EnviroProbe).
SETUP MAINTENANCE LOG IN
Administrator
PAGE PAGE PAGE
1 2 3
Batt. Module 1 - 2
2 3 4 5 6 7 8
4.00 4.00 4.00 4.00 4.00 4.00 4.00
26 26 26 26 26 26 26
2 3 4 5 6 7 8
4.00 4.00 4.00 4.00 4.00 4.00 4.00
26 26 26 26 26 26 26
) on the Main Screen.
EMS
7-36
Sep 25,2018
EVENT LOG
On-Line
String Voltage: 280.0V
String Current: 10.0A
9
10 11 12 13 14
4.00 4.00 4.00 4.00 4.00 4.00
26 26 26 26 26 26
9 10 11 12 13 14
4.00 4.00 4.00 4.00 4.00 4.00
26 26 26 26 26 26
10:15
SETUP