Delta Modulon DPH Series User Manual page 210

GENERAL SETTING
Item
DATE/
TIME
SCREEN
USER
Modulon DPH Series
UPS-1.1 MEASUREMENT SETUP
General Setting
Dust Filter Installation
Enable
Sub Item
Date Format
Date
Time
Screen Brightness
Screen Sleep (after)
Language
Admin Password*
1
MODBUS ID*
1
Baud Rate*
1
Access*
MAINTENANCE LOG IN
Administrator
DATE/ DUST
SCREEN USER
TIME FILTER
Dust Filter Installation Date Dust Filter Replacement Date
Sep-25-2018
Select the date format.
Set up the date.
Set up the time.
Adjust the LCD display brightness (default: 80).
Set up the LCD backlight sleep time (default: 1
minute).
Set up the display language (default: English).
1
Set up the administrator password (4 digits).
Set up the MODBUS ID for the MODBUS port
located at the rear of the touch panel. For the
location of the MODBUS port, see Figure 4-17.
Set up the baud rate for the MODBUS port located
at the rear of the touch panel. For the location of the
MODBUS port, see Figure 4-17.
Set up the access for the ON/ OFF Button (
'Any User' or 'Administrator Only'.
7-52
10:15
Sep 25,2018
EVENT LOG
Bypass
Sep-25-2020
Description
) as