Nortel Meridian 1 Replacement Manual page 98

Page 98 of 362 Replacing equipment
Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — —
You selected to copy the hard disk /p partition from IODU on Core 1
to IODU on Core 0.
60 MB of disk will be copied.
This wil erase old system files, Database files will NOT be erased.
Note that ERASED FILES CANNOT BE RECOVERED.
NOTE: Copy progress will be indicated by ... , one '.' per MB.
You may Continue with the copy operation or Quit now
and leave your system unchanged.
Please enter:
<a> -Copy /p partition from one Core 1 to Core 0.
<CR>-->
<q> - Quit.
Enter Choice > a
Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — —
Release: xxxx was installed successfully into /p partition
on your side
NOTE: In order to complete the install you must install flash ROM
In order to complete the install you must install CP BOOT ROM
Please press <CR> when ready...
553-3001-520 Standard 16.00 April 2000
10 Select <a> to confirm.
11 Select <a> to confirm the software release to be copied.
12 When the software is installed successfully, press <CR> to install
CP-software from the hard disk to Flash EEPROM, and install
CP-BOOT ROM. Follow the screen directions until the Main Menu
returns.
13 When the Main Menu returns, select <f> to install IOP-ROM.
553-7739
553-7741