Nortel Meridian 1 Replacement Manual page 227

Installing equipment
1 Set the NORM/MAINT switch to MAINT on the replacement card.
2 Insert disk A1 into the IOP/CMDU or CMDU.
3 Remove the current CP card and put it in a static bag and box.
4 Ensure the NORM/MAINT switch is set to MAINT, and insert the CP
replacement card into its vacated slot and hook the locking devices.
5 Press the MAN RST button on the replacement CP card.
6 Select the following options in sequence from the Install Menu:
<g>
<y>
<y>
<a>
<cr>
7 At the Install Menu, select the following options in sequence
<e>
<y>
<y>
<a>
<cr>
8 Remove the diskette from the IOP/CMDU or CMDU.
9 Select the following options to quit:
<q>
<y>
<a>
Replacing equipment
to reinstall CP software
to start installation
to continue installation
to continue with ROM upgrade
to return to the Install Menu
to install CP-BOOTROM
to start installation
to continue installation
to continue with ROM upgrade
to return to the Install Menu
to quit
to confirm quit
to reboot the system.
Page 227 of 362
Hardware replacement