Nortel Meridian 1 Replacement Manual page 251

3 Set the ENB/DIS switch to DIS.
To avoid interrupting service, set ENB/DIS switches to DIS before
disconnecting or connecting cables.
4 Tag and disconnect cables to the card you are removing.
5 Unhook the locking devices on the card; pull it out of the card cage.
Install equipment
1 Set the ENB/DIS switch to DIS on the replacement card.
2 Insert the replacement card into the vacated slot and hook the locking devices.
3 Connect cables to the replacement card.
4 Set the ENB/DIS switch to ENB on the replacement card.
5 Software enable and test the FIJI in LD 39:
ENL FIJI xx
STAT FIJI
When the process is complete, you receive a system response.
If there is a problem, a FIJI system message is generated and the red LED
lights on the faceplate of the card.
6
If there is no problem, exit LD 39:
****
7 Test the FIJI cards:
****
Tag defective equipment with a description of the problem and package it for
return to a repair center.
Replacing equipment
CAUTION
xx is the FIJI group and shelf number, which is
displayed on the FIJI front panel.
.
to exit the program
to exit the program
Page 251 of 362
Hardware replacement