Nortel Meridian 1 Replacement Manual page 330

Hardware replacement
Table of Contents

Advertisement

Page 330 of 362
Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — —
The Software Installation Tool will install or upgrade Meridian-1
System Software, Database and the PE-ROM (both CP and IOP ROM).
You will be prompted throughout the installation and given the
opportunity to quit at any time.
Please enter:
<u> - To Install menu.
<CR>-->
<t> - To Tools menu.
<q> - Quit.
Enter choice > u
553-3001-520 Standard 16.00 April 2000
Replacing equipment
19 Install the CD-ROM disk into the CD-ROM drive. To install the
CD-ROM:
a
press the button on the CD-ROM drive to open the CD-ROM disk
holder
b
place the CD-ROM disk into the holder with the disk label showing
c
use the four tabs to secure the CD-ROM in the disk holder
d
press the button again to close the CD-ROM disk holder (don't push
the holder in by hand)
20 Press the MAN RST button on the CP card.
21 At the Main menu select <u> to go to the Install menu.
M A I N M E N U
553-7780

Advertisement

Table of Contents
loading

Table of Contents