Nortel Meridian 1 Replacement Manual page 284

Page 284 of 362
553-3001-520 Standard 16.00 April 2000
Replacing equipment
4 Software enable the card:
LD 32
ENLC l s c
When the process is complete, you will receive a system response
STAT l s c
Obtain the status of the card to ensure that the card is enabled
****
To exit the program
5 (Optional): Test the card:
LD 30
SHLF l s
("l s" represents loop, shelf number)
Note: This command tests every card on the designated shelf.
If there is a problem, an NWS system message is generated and the red
LED(s) on the faceplate of the card will remain lit.
If there is no problem, exit LD 30.
6 Tag defective equipment with a description of the problem and package
it for return to a repair center.