Nortel Meridian 1 Replacement Manual page 317

Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — —
The Software Installation Tool will install or upgrade Meridian-1
System Software, Database and the PE-ROM (both CP and IOP ROM).
You will be prompted throughout the installation and given the
opportunity to quit at any time.
Please enter:
<u> - To Install menu.
<CR>-->
<t> - To Tools menu.
<q> - Quit.
Enter choice > u
7 Ensure that the ENB/DIS switch on the IODU/C you will install is set to
DIS.
8 Insert the IODU/C into the following slots:
— For NT5D21 Core/Net Modules, insert the IODU/C in slots 17,18,
and 19.
— For NT9D11 Core/Network Modules and NT6D60 Core Modules,
insert the IODU/C into slots 16, 17, and 18.
9 Lock the locking devices by pushing them gently towards the faceplate.
Set the ENB/DIS switch to ENB.
A blinking letter "E" and number "5" displayed indicates that a failure
occurred. In that case, reseat the Security Device in its holder and reinsert
the card.
10 Insert the Install diskette that corresponds to your CP type into the
IODU/C on Core 0.
11 Press the MAN RST button on the CP card.
12 When the NT Logo screen appears, press <CR> to continue.
13 Enter the date and time.
14 When the Main Menu appears, select <u> to go to the Install Menu.
Replacing equipment
M A I N M E N U
Page 317 of 362
553-7780
Hardware replacement