Nortel Meridian 1 Replacement Manual page 144

Page 144 of 362
Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — —
Please insert the diskette with the keycode file into the floppy
drive.
Please enter:
<a> - Continue with the keycode validation
<CR>-->
(the keycode diskette is in the floppy drive).
<q> - Quit.
Enter Choice > a
553-3001-520 Standard 16.00 April 2000
Replacing equipment
.
c Select the following options in sequence from the Install Menu:
<e>
<y>
Specify software installation from the hard disk.
d Follow all screen directions until the Install Menu returns.
e Select the following options to quit:
<q>
<y>
f Remove disk A1 from the CMDU or IOP/CMDU and then reload
the system:
<a>
g Press the MAN RST button and then set the NORM/MAINT switch
to NORM on the replacement CP card. (It may take 2 to 4 minutes
for memory synchronization to take place.)
h Refer to "Software Installation Tool Reference" in Software
Conversion Procedures (553-2001-320).
i Check the status of the replacement CP card from the active side:
to install CP ROM only
to start installation
to quit
to confirm quit
to reboot the system.
553-7729