Nortel Meridian 1 Replacement Manual page 312

Hardware replacement
Table of Contents

Advertisement

Page 312 of 362
Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — —
You will now perform the database installation.
Note: If you are installing the Database from a floppy disk,
please insert the correct disk now.
Please enter:
<CR>-->
<a> - Install CUSTOMER Database
(the customer database diskette must be in the Core 1 disk drive).
<b> - Install DEFAULT Database
(the installation CDROM must be in the Core 1 disk drive).
<d> - Copy Database from the redundant disk.
<e> - Check the Database that exists on the hard disk.
<q> - Quit.
Enter Choice > a
553-3001-520 Standard 16.00 April 2000
Replacing equipment
21 At the Database Menu, insert the first 2MB Database diskette in the
IODU/C.
22
Select <a> to install the customer database.
23 Select <y> to start installation.
24 Select <a> to continue the database installation.
25 Select <a> to confirm that the database disk is in the drive.
26 Select <y> to load the database.
If the database does not fit on one diskette, you will be prompted to insert
additional diskettes.
27 Press <CR> to delete the hardware infrastructure database files from the
hard disk.
553-7779

Advertisement

Table of Contents
loading

Table of Contents