Convert Command Line Switches; Novatel Logs For Rinex Conversion; Convert Command Line Arguments - Novatel GNSS Receiver and Antenna SMART-AG User Manual

PC Utilities
4.3.2

Convert Command Line Switches

Convert4 supports several command-line switches to facilitate batch processing. To access its
Command Line Arguments window, open a command prompt window (select Accessories |
Command Prompt from the Start menu). Change directory (cd) to the directory on your hard drive that
Convert4 is stored. Type the following: convert4 -h
The Convert4 Command Line Arguments window appears as shown in Figure 7.
SMART-AG User Manual Rev 2
Table 6: NovAtel Logs for Rinex Conversion
NovAtel OEMV Family Log
RANGEA/B, or
RANGECMPA/B
BESTPOSA/B, or
PSRPOSA/B, or
RTKPOSA/B, or
MARKPOSA/B
IONUTCA/B
RAWEPHEMA/B
GLORAWEPHEMA/B
a
VERSIONA/B
b
SITEDEFA/B
a. Information from this log overrides data entered into the Receiver
Number, Type and Version fields using the OBS file button of the
RINEX Headers section, see Figure 6 on Page 41.
b. Available on DL-V3 receivers, refer to the DL-V3 User
Manual. Information from this log overrides data entered into
the Marker Name, Marker Number, Antenna Type and
Antenna Delta H fields using the OBS file button of the
RINEX Headers section.
Figure 7: Convert Command Line Arguments
Recommended Trigger
ontime 15
once
onchanged
onchanged
onchanged
once
once
Chapter 4
43