Propeller Shaft; Gearcase Lubricant - BRP Evinrude E-Tec Series Service Manual

Propeller Shaft

Debris from the water can become lodged around
propeller shaft. Frequent inspection can minimize
potential gearcase damage.
WARNING
When servicing the propeller, always shift
the outboard to NEUTRAL, turn the key
switch OFF, and disconnect the battery
cables at the battery.
Remove propeller. Refer to Propeller Hardware
Installation on p. 74.
Inspect bushing and blade surfaces. Replace
damaged or worn propellers.
Clean propeller shaft. Inspect propeller shaft
seals. Replace damaged or worn seals.
Apply Triple-Guard grease to entire length of pro-
peller shaft prior to installing propeller.
Reinstall propeller hardware and propeller.

Gearcase Lubricant

Always check the fill level of the
IMPORTANT:
gearcase lubricant prior to removing drain/fill plug.
A tie strap can be used to check lubricant level.
1
1. Tie strap
Examine drained lubricant for excessive metal
fragments and for any indication of water in oil
(cloudy or milky appearance). Lubricant that is
black in color with a burnt odor indicates worn,
overheated oil. Pressure and vacuum check gear-
cases with apparent leaks. Repair all leaks.
Refer to the INSPECTION AND MAINTENANCE
SCHEDULE on p. 80 for service frequency and
recommended lubricants.
Refer to LUBRICANT on p. 307 for complete
gearcase lubricant filling procedures.
1
1. Magnetic level and drain/fill plugs
2. Drain/fill hole
3. Lubricant level hole
Refill the gearcase with HPF XR Gearcase Lubri-
cant.
If HPF XR Gearcase Lubricant is not available, Hi-
Vis gearcase lubricant can be used as an alterna-
tive; however, long term durability may be affected
with continued use.
IMPORTANT:
cants include special additives for marine applica-
tions. Do not use any automotive gear lubricants,
2-stroke or 4-stroke engine oil, or any other oil or
grease for gearcase applications.
000072
MAINTENANCE
LUBRICATION
The recommended gear lubri-
3
3
2
DR33681
85