Shift Housing Service - BRP Evinrude E-Tec Series Service Manual

115,150,175,200 hp, 60 v models

Hide thumbs Also See for Evinrude E-Tec Series:

Table of Contents

COUNTER ROTATION

shaft assembly. Remove propeller shaft assembly

from the gearcase.

Counter Rotation Models

Shift Housing Service

Wear safety glasses to avoid injury.

The shift housing and forward

gear bearing are serviced as an assembly. If

either are worn or damaged, replace the complete

Insert a suitable tool under one end of the clutch

dog spring and remove it from its groove by

unwrapping it from around the clutch dog. Dis-

card the spring.

1. Clutch dog spring

Push the pin out of the clutch dog. Remove all

Remove the gear, thrust bearing, and thrust

washer from the shift housing.

2. Thrust bearing

3. Thrust washer

reverse gear on counter rotation gearcases.

Remove the shift lever pin from the housing.

Remove shift shaft, cradle and shift lever. Move

The shift housing supports the

Table of Contents