Water Intake Screens; Additional Maintenance; Lubrication; Steering System - BRP Evinrude E-Tec Series Service Manual

Water Intake Screens

Inspect condition of water intake screens. Clean
or replace as needed.
Confirm function of overboard water pressure indi-
cator.
1
1. Water intake screen
2. Overboard water pressure

Additional Maintenance

Confirm function of SystemCheck engine moni-
•
tor.
Check operation or visually inspect thermostats
•
and pressure relief valve. Clean or replace as
needed.
Check that all water passages, hoses, and fit-
•
tings for both the EMM and the vapor separator
flow water freely.
Replace water pump.
•

LUBRICATION

Steering System

Failure to regrease as recommended
could result in steering system corrosion.
Corrosion can affect steering effort, mak-
ing operator control difficult.
2
Grease the stainless steel output end of the steer-
ing cable with Triple-Guard grease.
Use an appropriate cleaning solvent to remove
corrosion and dirt from output end of cable prior to
coating it with grease. Make sure wiper nut is
drc4952arev
installed and not damaged.
2
1. Steering cable
2. Wiper nut
MAINTENANCE
LUBRICATION
WARNING
3
1
DR29546
83