Assembly - BRP Evinrude E-Tec Series Service Manual

115,150,175,200 hp, 60 v models

Hide thumbs Also See for Evinrude E-Tec Series:

Table of Contents

Remove the two trim rod rollers from the swivel

1. Trim rod roller

Remove the tilt support and bushing from the

swivel bracket and inspect the detent roller and

1. Tilt support bushing

Assembly

components have been thoroughly cleaned.

Replace any seals that have been removed.

Inspect all thrust washers and bushings for evi-

dence of deterioration.

Install the detent roller and spring and the tilt sup-

port with bushing in the swivel bracket. Torque

bushing to 28 to 30 ft. lbs. (37.9 to 40.7 N·m).

1. Tilt support bushing

STERN BRACKET

Before proceeding, make sure all

Table of Contents