OILING RATES
EMM programming controls the rate of oil injec-
tion. Use engine diagnostics software to access
this EMM feature.
Oil Injection Rate
The TC-W3 OIL control setting allows the out-
board to be run on TC-W3 outboard lubricant.
Changing to the optional XD100 OIL CONTROL
setting requires the use of Evinrude XD100 out-
board lubricant. Running the outboard in XD100
OIL mode can reduce oil consumption by approxi-
mately one third. See Oil Control on p. 109.
1. Oil control setting
Powerhead oil programming labels are provided
to identify EMM oil programming. Install the cor-
rect label to alert user to specific oil requirements.
Make sure the engine label and
IMPORTANT:
boat decal match EMM programming.
1
1. Evinrude /Johnson XD30 outboard lubricant (TC-W3)
YELLOW label
2. Evinrude /Johnson XD100 outboard lubricant (Premium)
BLUE label (Installed)
XD100 Outboard Oil Decal
Evinrude/Johnson XD100 oil decals are available
to label boats equipped with Evinrude E-TEC out-
boards that have been programmed for the
XD100 oil injection ratio.
Use the XD100 Outboard Oil Decal, P/N 352369,
to accurately inform the boat operator of the
XD100 outboard oil requirement.
1
XD100 Outboard Oil Decal
Install decal(s) in one or more of the highly visible
recommended locations to alert the outboard
operator(s).
Recommended Locations:
005140
Dashboard/deck of boat, adjacent to key switch
•
Deck of boat, adjacent to the remote oil fill
•
Deck of boat, adjacent to oil tank assembly
•
Oil tank cover
•
Cover of oil tank compartment
•
Attach to oil tank or oil fill cap
•
IMPORTANT:
boat decal match EMM programming.
2
An optional XD100 Oil Tank Tag, P/N 352927, is
available to label oil tanks on outboards pro-
grammed to operate on XD100 outboard oil.
Break-in Oiling
The Break-in Oil setting doubles the oiling ratio for
the first two hours of operation above 2000 RPM.
See Oil Control on p. 109.
004964
OILING SYSTEM
OILING RATES
Make sure the engine label and
004522
8
217