Crankshaft - BRP Evinrude E-Tec Series Service Manual

115,150,175,200 hp, 60 v models

Hide thumbs Also See for Evinrude E-Tec Series:

Table of Contents

Crankshaft

Wear safety glasses to avoid injury.

Carefully lift crankshaft straight up and remove

from crankcase.

Remove upper seal from crankshaft. Discard the

seal. A new upper seal must be installed on

If the lower crankshaft is to be resealed or the

lower bearing replaced, remove the lower bearing

seal housing.

Remove the housing O-ring. Discard O-ring.

To remove the housing seal, use a punch as

shown. Discard seal.

Inspect housing and replace if necessary.

Table of Contents