BRP Evinrude E-Tec Series Service Manual page 319

115,150,175,200 hp, 60 v models

Hide thumbs Also See for Evinrude E-Tec Series:

Table of Contents

Wrench is fully seated in head of pinion screw.

Use a long 3/4 in. combination wrench to hold

lower Driveshaft Spline Tool and a 1/2" drive

wrench to turn the Lower Driveshaft Wrench in a

counterclockwise direction. Loosen screw com-

Remove the four driveshaft bearing housing

screws with washers and then the bearing hous-

1. Driveshaft bearing housing

Remove shims, thrust washer, and thrust bearing

with the lower driveshaft.

2. Thrust bearing

3. Thrust washer

Remove pinion gear from gearcase housing.

Chapters

Table of Contents