Inspection; Assembly - BRP Evinrude E-Tec Series Service Manual

115,150,175,200 hp, 60 v models

Hide thumbs Also See for Evinrude E-Tec Series:

Table of Contents

COOLING SYSTEM

PRESSURE RELIEF VALVE SERVICING

Remove the pressure valve components.

Inspection

Inspect all components for cracks, heat damage,

or signs of corrosion. Replace damaged compo-

nents. Clean all debris from pressure relief valve

Assembly is essentially the reverse of disassem-

bly. Pay close attention when performing the fol-

lowing additional tasks.

Torque cap screws to 60 to 84 in. lbs. (7 to 9.5

Table of Contents