Installing CS700/CS780 Hardware
Keyboard/Video/Mouse (KVM) Switch
To connect the KVM switch, follow these steps:
1. Connect the keyboard, monitor, and mouse to the KVM input connectors.
2. Use one of the supplied octopus cables (single connector on the KVM end spreads out to
three cables with separate connectors on the CPU end) to connect each application server.
- When connecting to the CS700/CS780 CPU, connect only the keyboard and monitor. No
mouse connection is required. The monitor connects in the front. The keyboard connects
in the front or rear as convenient.
46 Installing the CS700/CS780 Audio Conferencing Server
CPU Card
Monitor
FRONT
VIEW
Keyboard
REAR
VIEW
Keyboard