Accessing The Xt Series Local Menu - Avaya XT Telepresence Deployment Manual

Configuring the Avaya XT Telepresence
You can use the XT Remote Control Unit's initial default pairing to perform this task.
2. Enter a two-digit numeric code between 01 and 96 in the Remote Control Code field.
3. From the web interface only, select Save.
4. On the Simplified XT Remote Control Unit, press the * and # keys simultaneously until its
RED light blinks twice. On the advanced remote control unit, press the RED and GREEN
keys simultaneously until the GREEN light becomes RED.
5. Using the keypad, type the same number used in the Remote control code field.
When the code is not the default 01, the system displays the paired remote icon with its
new code at the top-right corner of the screen.
6. Select Finish in the web interface, or select OK on the endpoint.
Related links
About the XT Remote Control Unit

Accessing the XT Series Local Menu

About this task
After switching on the XT Series, the main menu appears on the connected monitor.
To navigate the local menus, use the XT Remote Control Unit or for Avaya XTE240 only, you can
use a keyboard and mouse. You can also access the system via the web, where the main screen
is laid out differently (see
configured as part of a telepresence system, you can only control the system with Avaya
Collaboration Control.
August 2020
Figure 36: General Settings
on page 37
Accessing XT Series Web Interface
Avaya Video Conferencing XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
on page 44). Once the systems are
42