Using An External Keyboard/Mouse - Avaya IX Collaboration Unit CU360 Release Notes

© 2019 Avaya Inc. All rights reserved.
focus. Some keys will be received even if the app is not in foreground or does not have the
input focus. Please note that if the screen is split, the input focus must be assigned to the
proper side of the screen by clicking on it.
You can use the following shortcuts:

Using an External Keyboard/Mouse

Please note that you can also connect to your Avaya CU360 a standard keyboard and/or
mouse, adding external hardware through the USB interface or through Bluetooth
connections. Having an external keyboard attached to your unit, makes it easier to type and
to access menus. You can use a keyboard including a mouse-pad or add an external
independent mouse device.
When you connect an external keyboard to your unit, you should set the keyboard layout for
the attached physical keyboard. Setting a correct keyboard layout is necessary for typing
correctly in word processing applications etc.
To setup or change the keyboard layout for an external keyboard in Android:
© 2015 Avaya Inc. All rights reserved. NDA Confidential, Use pursuant to your agreement.
•
To show or hide a mouse pointer, press the 'Mouse' key.
•
To exit from a CU360 App page or from an app, press the 'Back' key
•
To Mute or Unmute the audio in your device, use the 'Mute/Unmute' key.
•
To stop the device to transmit your video and presentation while in a meeting,
press the Privacy key ('Video Mute/Unmute'). You video image could be
replaced with a synthetic image.
•
To Connect or Disconnect the call in your device, use the corresponding keys
when the CU360 Video-collaboration application is in foreground. When the
CU360 app is not in foreground, pressing Connect or Disconnect keys on the
remote will resume the app.
•
Short press the 'Power' key to put in standby the system or to wake-up the
system. When in standby, the monitor connected to the system can turn off.
•
Short press any key except mouse key to wake-up the system
•
Long press the 'Power' key to power on/off the system. To switch off the
system, keep the key pressed until you see the warning on the monitor that the
system is powering off.
•
Volume/mute/presentation/zoom/privacy/recording keys keep doing their action
even when the app is minimized (if this not requires user interaction – answer to
choices or pin insertions).
•
To switch between yellow and white symbols on the keyboard on the back of
the remote control, press the FN key.
•
The Voice Activation key is not active in this release.
Important
•
When the mouse pointer is active, a fixed blue led light is on and the remote
control will transmit all its movements to the device, causing a faster discharge
of the batteries. It is strongly suggested to disable the mouse pointer when
not using it.
•
When the mouse pointer is active, the ok button will not work as
selection/enter on the current control (the focused one), but only as a
click/long click on the current mouse pointer position. Please assure to disable
the mouse pointer when not using it.
•
Open Settings → Language & Input section in Android Settings.
•
On the Language & Input screen tap on Physical Keyboard. A list of physical
keyboards is displayed.
•
Press on the name of your physical keyboard.
•
A whole list of keyboard layouts will be displayed. From here, you can choose
the keyboard layout that corresponds to your physical keyboard.