Srx2 High Noise Headset Specifications; Replacing An Earpad On The Srx2 Hard-Hat Or High-Noise Headset - Honeywell Vocollect Hardware Reference Manual

The single cup design gives operators the option of wearing the headset speaker on either ear for their long-term
comfort. It also provides protection in very cold environments, such as a warehouse freezer.
Note:
• The high-noise headset has microphone cap storage located on the headband and above the headset
earcup.
• A stability strap is available for this model.

SRX2 High Noise Headset Specifications

Weight
Operating temperature
Storage temperature
Drop Tested
Enclosure rating
Humidity
Noise Reduction Rating
Note: Packaging varies for product shipments. Generally, packing materials are about 15% of the total
shipment weight.

Replacing an Earpad on the SRX2 Hard-Hat or High-Noise Headset

1. Remove the SRX2 electronics module from the earcup.
2. Pry the earcup apart by grasping the inside and outside sections of the earcup and pulling the two sections apart.
®
Figure 144: Vocollect SRX2 High Noise Headset
3.74 ounces (106g)
-22°F to 122°F (-30°C to 50°C )
-40°F to 158°F (-40°C to 70°C)
• 12 drops from 7 feet (2.1 m) at minimum and
maximum operating temperatures
• 24 drops from 6 feet (1.8 m) at varying angles and at
minimum and maximum operating temperatures
Meets IP54
5-95% condensing
≥ 10.5 dB
| Honeywell Wireless Headsets | 192