Honeywell Vocollect Hardware Reference Manual page 101

Connecting the Pidion BM-170 Display to a Talkman A500/A700
1. Turn on the Talkman A500 or A700 device.
2. Turn on the display.
The display will initialize.
3. Press the Connect to a Voice Device button to begin connecting the display to your Talkman.
A list of nearby devices' serial numbers that can accept a connection are displayed.
4. Select the serial number of the Talkman to which you want to connect and confirm your selection.
You will be taken back to the main screen, and the display will be connected to the Talkman.
Figure 47: The Initial Screen
Figure 48: List of Devices
Figure 49: Confirming the Connection
| Talkman A500 | 101