Honeywell Vocollect Hardware Reference Manual page 65

Figure 8: Mount locations protected by vehicles but open
CAUTION: Do not mount the device in the driver's area of the vehicle or areas where it can distract the
driver.
• Consider additional options from RAM
provide additional mounting flexibility.
Part Description
Double 1" ball adapter
Double socket arm B Ball
A length
• Lock parts into place if they might be moved during normal operations
The parts used for mounting the Talkman were designed for a fixed position with easy adjustment. While unlikely,
these parts may loosen over time with inadvertent impacts of daily use—especially if the mountings have not been
firmly secured or if workers attempt to adjust the mounting manually.
To prevent this issue, remove the user-adjustable handle on the arm and install a 1/4" #20 nylon lock nut provided
with the Vocollect VMT kit. The lock nut cannot be loosened by hand and resists most vibrations.
Secure VMT cabling
•
The cables and wiring that connect the Talkman VMT must be well secured to the vehicle so that they do not get
caught on anything. Snagged cables could result in an accident and damage to the VMT or vehicle.
CAUTION: Separate the cabling from other wiring in the vehicle and ensure that it is routed away from
sharp edges.
for good wireless reception (showing Talkman A500)
®
Mounts In particular, the following standard RAM Mounts parts
Part Number
RAM-B-230U
RAM-B-201U-A
Usage
The adapter offers more
articulation to maneuver
and position the Talkman
device in a protected area
of the vehicle.
This arm and other arm
lengths offer options for
the best vehicle fit.
| Talkman A700 | 65
Image