Positioning The Talkman A500/T5 Vmt; Talkman Vmt Parts And Accessories - Honeywell Vocollect Hardware Reference Manual

Note: This configuration does not require you to connect the A500 or T5-Series device to the vehicle's power
source. If desired, for operational reasons, A500 or T5-Series devices may be used in VMT configuration
using a Honeywell battery.
Talkman A500/T5 VMT Accessory Specifications
Operating Temperature
Storage Temperature

Positioning the Talkman A500/T5 VMT

• Determine the best position for the device and all the associated components. If a similar device was previously
installed, check to see if the position it used is suitable for the device.
• Test the installation for at least 30 minutes before installing on another vehicle. Record all details:
• Check that the position of the device does not obstruct vehicle controls.
• Check that the device does not obstruct the driver's view.
• Check the position of the device for user comfort over long periods.

Talkman VMT Parts and Accessories

The following device-mounting options are supplied by Honeywell. Order one part from each line for your
configuration.
Table 1 describes items that support Talkman VMT configurations. Several electrical components are common for
both Talkman A500 and Talkman A700 configurations.
Table 2 describes battery-powered configurations. Battery-powered configurations enable you to safely mount the
Talkman device without interfacing with the vehicle's electrical system. Batteries and chargers are required to support
these configurations.
Table 3: Vehicle-Powered Vehicle Mount Configurations
A500
BL-710-1 - VEHICLE MOUNT, HOLDER,
TALKMAN(R) T5 SERIES
BL-710-101 - VEHICLE MOUNT, HOLDER/BASE
SCREW ON ATTACHMENT, TALKMAN(R) T5
SERIES (connects between Talkman device mount
and mount arm)
BL-710-102 - VEHICLE MOUNT, ARM,
TALKMAN(R) T5 SERIES
-30° to 50° C (-22° to 122° F)
-40° to 70° C (-40° to 158° F)
A700
BL-904 - POWERED VEHICLE DOCK, A700
SERIES
BL-710-101 - VEHICLE MOUNT, HOLDER/BASE
SCREW ON ATTACHMENT, TALKMAN(R) T5
SERIES (connects between Talkman device mount
and mount arm)
BL-710-102 - VEHICLE MOUNT, ARM,
TALKMAN(R) T5 SERIES
| Talkman A500 | 90