Sr-35 Vocollect Hard-Hat Headset; Sr-35 Headset Specifications - Honeywell Vocollect Hardware Reference Manual

Noise Reduction Rating
Note: Packaging varies for product shipments. Generally, packing materials are about 15% of the total
shipment weight.

SR-35 Vocollect Hard-Hat Headset

The SR-35 Vocollect ™
only be used with a hard hat that has a slot on the side that accepts a Peltor clip. This clip is sold separately.
Installing the SR-35 Headset to a Hard Hat
1. Position the fork assembly so that the hard-hat clip is at the top end of the earcup, opposite the cord end.
2. Push the clips on the two fork ends onto the pegs on either side of the earcup. Some force is required.
3. Position the hard-hat clip with the tab pointing into the slot on the side of the hard hat. The front of the clip with
the screw should face away from the hard hat.
4. Slide the clip into the slot until it is firmly seated.

SR-35 Headset Specifications

Weight
Operating temperature
Storage temperature
Drop Tested
Enclosure rating
Humidity
Noise Reduction Rating
Note: Packaging varies for product shipments. Generally, packing materials are about 15% of the total
shipment weight.
hard-hat headset has a built-in clip that fits most industrial hard hats. The SR-35 headset can
Figure 110: SR-35 Hard Hat Headset
Average 6 dB
6.2 ounces (175 g) with cable
4.7 ounces (133 g) without cable
-40°F to 122°F (-40° to 50°C)
-40°F to 158°F (-40° to 70°C)
• 15 drops from 7 feet (2.1 m) at minimum and
maximum operating temperatures
• 50 drops from 6 feet (1.8 m) at minimum and
maximum operating temperatures
Meets IP67
5-90% condensing
Average 5 dB
| Honeywell Wired Headsets | 161