T5/A500 Adjustable Shoulder Harness; Belts And Belt Clips - Honeywell Vocollect Hardware Reference Manual

T5/A500 Adjustable Shoulder Harness

To comply with government safety standards, the device must be used with either a Vocollect customized belt and
clip, a Vocollect customized shoulder harness, or a Vocollect belt holder.
T5/A500 Adjustable Shoulder Harness Specifications
Shoulder Strap
Chest Straps (Regular)
Chest Straps (Large)
Putting a Device on a T5/A500 Shoulder Harness
To wear a device using the shoulder harness option, attach the device to an adjustable Honeywell harness with a
specially designed mounting clip (provided with the belt or harness).
Attach the clip to the harness at the beginning of a shift. You can attach the device to and remove the device from the
clip as often as necessary throughout the shift.
Figure 81: T5/A500 Shoulder Harness Properly Worn - Front and Back Views
1. Open the flap on the front of the shoulder harness by unsnapping the two buttons.
2. Slide the flap through the slots on the mounting clip then snap the buttons together.
3. Unbuckle the large loop.
4. Put your left hand through the small loop and slide the harness over your left shoulder.
5. Clip the large loop in front of your chest.
6. Adjust the straps.
7. Connect the device to the shoulder harness clip by sliding the device onto the clip until it snaps into place. The
device is properly clipped in place if you cannot remove it from the clip without pressing the device's clip release
button.

Belts and Belt Clips

To comply with government safety standards, the device must be used with a Vocollect customized belt and clip, a
Vocollect customized shoulder harness, or a Vocollect belt holder.
2" (5 cm) Wide Adjustable Nylon
Two Adjustable Elastic Nylon, 32"-48"(81 cm - 122 cm)
Two Adjustable Elastic Nylon, 41"-66" (104 cm - 167
cm)
| Talkman T5 Series | 124