Honeywell Vocollect Hardware Reference Manual page 196

Use Case
Disconnect/clear paired
devices/enter pairing mode
Volume up
Volume down
Mute Toggle
Mute reminder tone
Incoming call
Connection dropped
Voice link established
Voice link dropped
Audio Transfer Toggle
Normal operation low
battery
USB plugged in
USB plugged in
USB plugged in
SRX-SL State
Discoverable and
Connectable
Volume increases
Volume decreases
Mic is muted, or voice
application paused
Mic is muted via Mute
button, audio is still active
No reminder tone if muted
via boom rotation
Paired and connected with
HFP device
Connectable but not
discoverable. Any
Bluetooth device can
connect to it if it knows the
address.
Example: answer call, start
voice app
Example: Hang up call
Audio transferred to/from
headset
Paired and connected, low
battery.
USB Charging, Bluetooth
disabled.
USB Charging complete,
Bluetooth disabled
USB not Charging,
Bluetooth disabled
LED
Brief rapid flashing
of GREEN LED's to
acknowledge command,
then green LED on Solid
Normal operation
Normal operation
Normal operation
Normal operation
Three rapid blue flashes at
1 second intervals.
Flashing green.
Flash frequency is 1.5
seconds.
On 20%, off 80%
Normal operation
Normal operation
Normal operation
Flashing Red.
Flash frequency is 1.5
seconds.
On 20%, off 80%.
Solid Red
Solid Green
Off (cable not connected to
charger, cable connected to
PC that is in Sleep mode)
| Honeywell Wireless Headsets | 196
Tones
None
Short single tone (gets
louder as volume increases)
Short single tone (gets
softer as volume decreases)
Short high-pitch tone
Short low-pitch beep every
30 seconds
Ascending scale ringtone
Three descending tones
when connection is
dropped
Two low-pitch to high-
pitch tones
Two high-pitch to low-
pitch tones
Short single tone
5 rapid alternating tones in
the following pattern:
• low-pitch
• high-pitch
• low-pitch
• high-pitch
• low-pitch
Repeats every 5 minutes
None
None
None