Honeywell Vocollect Hardware Reference Manual page 201

Put On the Headset
Always use headband ear pads with Honeywell headsets to protect the equipment and ensure optimum speech
recognition performance.
1. Put the headset on and adjust the ear pad to fit snugly over your ear.
2. Rotate the microphone into position with the rotating lever at the ear piece.
3. Make final adjustments with the boom so that the microphone is positioned correctly. Position the microphone
as close to your mouth as possible, but outside of your breath stream. It should be facing your upper lip, and not
touching anything (for example, clothing, skin, or facial hair). There are three notches at the lower range of the
microphone boom swing. Select the one that best places the microphone near the mouth.
4. Follow the instructions in Pair the
Care and Use of the SRX-SL Headset
The headsets and microphones used with the Honeywell Voice system are delicate pieces of electronic equipment.
Proper care and use of these products will ensure that they work well for a long time.
Important: For maximum hygiene, Honeywell discourages sharing headbands among operators.
The design of the SRX-SL Wireless Headset features an electronics module that can be removed from the headband
The electronics module can be shared among operators over multiple shifts, providing some level of hygiene while
potentially reducing costs.
Adjust Headset for Comfort
Honeywell has designed the SRX-SL headset based on data for most head shapes and sizes. Because the headset is the
most personal piece of voice equipment and must remain stable while workers perform very physical tasks, users may
benefit from these headset adjustment guidelines.
Placement of the "T-bar" pad: The SRX-SL headsets have pads called "t-bars" opposite the speaker side of the
headset. The t-bar should be positioned on a part of the head with the least amount of muscle.
SRX-SL Headset Using Bluetooth
| Honeywell Wireless Headsets | 201
to pair the headset to the device.