Changing The Speaker's Gender; Understanding Talkman Commands - Honeywell Vocollect Hardware Reference Manual

The device says "Current operator is operator name. Select menu item."
2. Press the + or — button until the device says "Change speed."
3. Press the Operator button.
If you use the + button to scroll through the options, Change Speed is the fourth menu item in the list.
4. Press the + button to make the voice faster or the — button to make the voice slower.
The device says "faster" each time you press the + button and "slower" each time you press the — button. If the
speed of the voice is at the fastest possible setting, the device says "This is fastest." If the speed of the voice is at
the slowest possible setting, it says "This is slowest."
Note: You can exit this menu without changing the settings by pressing the Play/Pause button before you
press the Operator button.
5. When the voice is speaking as quickly or as slowly as you want, press the Operator button to save the new speed
setting.

Changing the Speaker's Gender

Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green (A500, T5-
series and T2-series), solid green (T1), or have a solid green ring segment or a rotating green ring (A700).
1. Press the Operator button.
The device says "Current operator is operator name. Select menu item."
2. Press the + or — button until it says, "Change speaker."
3. Press the Operator button.
If you use the + button to scroll through the options, Change Speaker is the sixth menu item in the list.
4. Press the + or — button to hear the next speaker.
The device says, "This is female" when it toggles to the female voice, or "This is male" to indicate the male voice.
Note: You can exit this menu without changing the settings by pressing the Play/Pause button before you
press the Operator button.
5. When you hear the speaker you want to use, press the Operator button to select that speaker.

Understanding Talkman Commands

The Talkman device prompts the operator for responses that are specific to the voice-directed work he or she is
performing. Several basic Talkman commands, however, can be spoken by the operator at almost any time while
using the device.
You want to...
hear the current prompt again
put the device in sleep mode
wake up the device
erase the previous response so you can respond to the
same prompt again (VoiceClient only)
check the remaining charge on a Talkman A700 battery
(VoiceCatalyst 2.0 and newer only)
hear instructions for your response to the current prompt
hear a list of vocabulary words that you can say at the
current prompt
Spoken Command
"Say again"
"Talkman sleep"
"Talkman wake up"
"Talkman backup"
"Talkman battery status"
"Talkman help"
"Talkman help"
| Talkman Devices and Headsets | 26