Battery Warm-Up Time; About Led Indicators; A500 Device Led Indicators - Honeywell Vocollect Hardware Reference Manual

Table of Contents

Advertisement

Battery Warm-Up Time

If a battery has been used in a cold environment, it will not begin charging until it warms up sufficiently.
Temperature of battery use
-4°C (24.8°F)
-10°C (14.0°F)
-20°C (-4°F)
-30°C (-22°F)

About LED Indicators

Vocollect Talkman devices, SRX and SRX2 headsets, and their chargers have LEDs that indicate the state of the
equipment. These LEDs may be on, off or blink. In some cases an LED will blink, alternating between two colors.
If the LEDs indicate that there is a problem, refer to information on troubleshooting to solve the problem. See also
Troubleshooting Problems Indicated by

A500 Device LED Indicators

LED
Green
Red
Amber/Yellow
Approximate warm-up time
6 minutes
10 minutes
22 minutes
30 minutes
LED.
Status
On
Fast Blink
Slow Blink
On Briefly
On Continuously
Blinking
Off
Fast Blink
Slow Blink
A500 Device
Device is on
The device is in a charger
One of the following:
the device is in sleep mode and
not in a charger
the voice application selection
menu is in use
certain portions of software are
loading
Device is turning on
Device is turning off
Error, contact system administrator
One of the following:
retrieving and loading an
operator from VoiceConsole
retrieving, reading and loading
a voice application from
VoiceConsole
certain portions of software are
loading
Wi-Fi off
Wi-Fi on but not connected
Wi-Fi is on and connecting to a
wireless network
| Talkman A500 | 86

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents