Pairing A Headset By Voiceconsole Pairing - Honeywell Vocollect Hardware Reference Manual

2. Initiate the pairing inquiry from the master device by pressing or clicking the appropriate button on the screen or
device.
3. Hold the headset and wireless device so they are within six inches of each other but not touching.
4. Select the ID number of the headset you want to use from the Select SRX Headset list on the screen.
5. Tap, click, or press the appropriate button on the screen or device to create the pairing.
The device briefly displays that the device attempts to connect to the headset . Once the headset connects, three
tones play in the headset, the SRX Headset Status displays as Connected. The pairing confirmation step is skipped
because the pairing was specified by the user.
6. Press the Play/Pause button to begin working.
Handheld Device Pairing Status Icons
When using the Vocollect Voice or Voice MP application on a handheld wireless device, an icon in the upper right
hand corner of the screen indicates the pairing status. Vocollect Voice on a PC displays similar browser-based
notifications, but the icons are different.
Icon

Pairing a Headset by VoiceConsole Pairing

The VoiceConsole pairing method should only be used if the device/headset pairing will be performed once and never
changed. While manual pairing can also result in this permanent pairing, VoiceConsole eliminates the device inquiry
step and begins paging immediately for the Bluetooth address.
Prerequisites:
• The headset is powered off.
• The device is not in a charger, and there is no wired headset connected to it.
• The device is in sleep mode — not in use running an application.
• The device is Bluetooth ready with Bluetooth connection features enabled.
1. In VoiceConsole, click Devices and select the device for the pairing.
2. In Device Actions, select the actions for pairing to a peripheral, and complete the pairing. See VoiceConsole help
for detailed instructions.
The pairing can be performed with the device powered off or while the device is running an application. When the
device powers up or goes into sleep mode, the paging process begins.
3. Place the headset in pairing mode.
• On an SRX headset: press and hold the Plus (+) and Minus (-) buttons for four seconds.
• On an SRX2 headset: press the Power button to turn it on.
4. When the two connect, the headset will play ascending connect tones. The pairing confirmation step is skipped
because the pairing was specified by the user.
5. Press the Play/Pause button to begin working.
Status
A wireless headset is not paired to the device
The device is searching for a headset
The device is paired with a headset but not yet connected
The device is connected to the headset
| Honeywell Wireless Headsets | 210