Srx2 Headset Battery Charger Specifications; Srx2 Battery Charger Wall Mount - Honeywell Vocollect Hardware Reference Manual

• The LED indicator light on the charger front panel indicates if the charger is powered on or not.
• Each battery port has LED lights that indicate battery charge status and battery health.
• SRX2 headset battery chargers are designed to be placed on a desktop or mounted on a wall using a DIN rail.
Customer with multiple chargers must allow the required space between wall mounted units and must avoid
stacking desktop units on top of each other.

SRX2 Headset Battery Charger Specifications

SRX2 Charger Specifications
Weight
Width
Depth
Height
Input
Output
Cord
Operating Temperature
Storage Temperature
Humidity
Note: Packaging varies for product shipments. Generally, packing materials are about 15% of the total
shipment weight.
CAUTION: The 5V power supply for the 6-bay unit is a small wall-mounted supply at the end of the cord.
The Plug Socket of the power supply is considered the Disconnect Device to the A.C. Mains. The socket-
outlet shall be installed near the equipment and shall be easily accessible.

SRX2 Battery Charger Wall Mount

The SRX2 battery charger is ready for mounting on a standard DIN rail without any customer modifications. A
DIN rail must be installed on a wall in a suitable location. Honeywell offers a DIN rail suitable for mounting a
single charger, but customers may choose to purchase rails from other suppliers as long as the rails meet Honeywell
specifications. Consider the following before wall mounting your charger.
• Customer assembly required for the rail wall mount.
• Customer assumes all responsibility for the installation of charger units.
20-Bay Charger
8 lbs. (3.63 kg.) with 20 batteries
6.38 lbs. (2.89 kg.) without batteries
Approximately 55 cm (21.65 in.)
Approximately 15.8 cm (6.22 in.)
Approximately 15.7 cm (6.18 in.)
Power supply input voltage: 90VAC
to 264VAC, 50/60Hz
Power supply input current: 2A max
Power supply output voltage: 12V
Power supply output power: 80W
max
Less than 40W required to charge 20
batteries from fully depleted to fully
charged.
Uses standard IEC 60320 plug
32° to 104° F (0° to 40° C)
-40°F to 158°F (-40° to 70°C)
5% - 95% relative humidity, non-
condensing
6-Bay Charger
2.5 lbs. (1.14 kg.) with 6 batteries
2.1 lbs. (.96 kg.) without batteries
Approximately 26.67 cm (10.5 in.)
Approximately 11.43 cm (4.5 in.)
Approximately 12.06 cm (4.75 in.)
Power supply input voltage: 100VAC
to 240VAC, 50/60Hz
Power supply input current: 2A max
Power supply output voltage: 5V
Power supply output power: 20W
max
Less than 10W required to charge 6
batteries from fully depleted to fully
charged.
Uses wall adapter with switchable
plugs provided in kit
32° to 104° F (0° to 40° C)
-40°F to 158°F (-40° to 70°C)
5% - 95% relative humidity, non-
condensing
| Chargers | 242