Honeywell Vocollect Hardware Reference Manual page 181

4. Hold the battery with the Vocollect logo facing toward you, and push it onto an empty port on the battery charger
until it snaps into place.
5. Note: See the chart on
Make sure that the battery is properly mounted on the charger port. The ring LED indicator light will turn yellow
or green when the battery contacts connect to the charger port contacts. If the ring LED blinks red, the battery is
not seated properly. Remove the battery, and mount it on the port again.
6. When the ring LED indicator turns a solid green, the battery is fully charged. Pull the battery off the charger port
to insert it into an SRX2 headset electronics module.
Inserting a Battery into the SRX2 Wireless Headset
1. Make sure the battery is charged. A battery is fully charged and can be removed from the charger when the LED
ring indicator on the charger port for that battery is green.
2. Position the headset electronics module with the buttons facing toward you.
3. Hold the battery with the label side down and contacts facing the open end of the electronics module opposite the
mic boom.
4. Push the battery onto the electronics module until it clicks in place.
5. Make sure the battery is firmly in place and cannot be removed without pressing the battery release latches.
Warning: Replace a battery only with another battery that has been authorized by Honeywell for the product
you are using. Use of an unqualified battery may present a risk of fire, explosion, leakage, or other hazard.
See also Honeywell Battery Safety
Removing a Battery from an SRX2 Wireless Headset
Important: Do not remove the battery from the SRX2 headset until the LED indicator on the headset is off.
1. Power off the headset by pressing and holding the Power button on the electronics module for one second.
2. Grasp the headset by the sides of the electronics module with your thumb and fingers on the black battery latches.
SRX2 Battery Charger LED Indicators
| Honeywell Wireless Headsets | 181
for more information on LED patterns .