For Users In Europe: Imager Compliance And Precaution; Declaration Of Conformity: Rohs - Honeywell Vocollect Hardware Reference Manual

For Users In Europe: Imager Compliance and Precaution

LASER Safety - The scan engine in the A730 complies with IEC 60825-1:2007 / IEC 60825-1:2014 Class 2 (1 mW,
630-680 nm).
LED Safety - The scan engine in the A730 complies with IEC 62471:2006-07 / EN 62471:2008
The scan engine in the A730 is classified as Risk Group 1.
• Exempt (No photobiological hazards based on the limits defined in the standard)
• Risk Group 1 (Low-Risk – does not pose a hazard based on normal behavioral limitations to exposure)
• Risk Group 2 (Moderate-Risk – does not pose a serious risk due to the aversion response to very bright light
sources or due to thermal discomfort)

Declaration of Conformity: RoHS

Directive 2011/65/EU of the European Parliament and Council of 8 June 2011
Restriction of Hazardous Substances (RoHS)
Products Manufactured by Honeywell
All Honeywell manufactured products shipped by Honeywell as of 1 January 2012 to destinations where the
DIRECTIVE 2011/65/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 (RoHS 2)
applies are compliant with this directive on the restriction of the use of certain hazardous substances in electrical and
electronic equipment.
The parts do not exceed the maximum concentrations by weight in homogenous materials for:
• 0.1% lead (Pb)
• 0.1% Hexavalent chromium (Cr6+)
• 0.1% polybrominated biphenyl (PBB)
• 0.1% polybrominated diphenyl ether (PBDE)
• 0.01% cadmium (Cd)
or qualify for an exemption to the above limits as defined in the Annex of the RoHS Directive.
Third Party products sold by Honeywell
Honeywell has obtained verification from all suppliers of all third party products that versions of those products
shipped by Honeywell as of 1 January 2012 to destinations where the DIRECTIVE 2011/65/EC OF THE
EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 (RoHS 2) applies are compliant with this
directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
The parts do not exceed the maximum concentrations by weight in homogenous materials for:
• 0.1% lead (Pb)
• 0.1% Hexavalent chromium (Cr6+)
• 0.1% polybrominated biphenyl (PBB)
• 0.1% polybrominated diphenyl ether (PBDE)
• 0.01% cadmium (Cd)
or qualify for an exemption to the above limits as defined in the Annex of the RoHS Directive.
™
| Honeywell ™ Regulatory Compliance | 302