Vocollect SRX2 Hard-Hat Headset
In environments where operators must wear hard hats, the standard over-the-head headset is not a viable option.
The Vocollect
SRX2 Hard-Hat headset has a built-in clip that attach the SRX2 earpiece, electronics module, and
®
microphone to most industrial hard hats. The Hard-Hat headset supports most hard-hat models commonly used in the
United States, Europe, and Japan.
When using the TouchConnect
can obtain the operator ID by touching the device to the
SRX2 Hard-Hat Headset Specifications
Weight
Operating temperature
Storage temperature
Drop Tested
Enclosure rating
Humidity
Noise Reduction Rating
Note: Packaging varies for product shipments. Generally, packing materials are about 15% of the total
shipment weight.
Installing the SRX2 Hard-Hat Clip
The SRX2 Hard-Hat headset attaches to the side of a hard hat using a clip that must be mounted on the hard hat.
Honeywell offers two clip styles, one designed to insert in a hard-hat slot and one that mounts over the side brim of
a non-slotted hard hat. Other hard-hat clips may be purchased and used provided that they fit the hard hat and attach
correctly to the SRX2 earcup. Vendors such as Howard Leight
Figure 134: SRX2 Hard Hat Headset
feature to pair the SRX2 Hard Hat Headset with a Talkman A700 Series device, you
™
symbol located on the outside of the headset earcup.
2.47 ounces (70g)
-22°F to 122°F (-30°C to 50°C )
-40°F to 158°F (-40°C to 70°C)
Excludes clips and attachment
•
12 drops from 7 feet (2.1 m) at minimum and
maximum operating temperatures
•
24 drops from 6 feet (1.8 m) at varying angles and at
minimum and maximum operating temperatures
Meets IP54
5-95% condensing
≥10.5 dB
™
offer these products.
| Honeywell Wireless Headsets | 187