Honeywell Vocollect Hardware Reference Manual page 174

Headset Function User Action
Lost connection: N/A
• A previously-
paired device is
not detected by
the headset at
power on
• A paired device is
powered off
• Low Power or
High Power
Pairing modes
fail to pair with a
device within 60
seconds
Low Battery N/A
Headset Mode LED Pattern
recommend
this pairing
mode for
Talkman
devices. This
mode greatly
increases the
likelihood
that your
headset will
pair with
the wrong
device.
Repeating pattern of
The headset cannot
three quick flashes,
find an un-paired
then off for about a
Bluetooth device
second.
within range.
Headset remains
in this mode for
10 minutes while
it waits for a
previously-paired
device to come
within range. After
10 minutes of no
activity, the headset
powers off.
Headset Constant very quick
automatically enters flutter (about 10
this mode when the flashes per second).
battery's remaining
charge reaches a
minimum threshold.
| Honeywell Wireless Headsets | 174
Tone
Three descending
tones when the
connection to the
master device is
dropped
No tone.
Voice prompt:
"Headset battery
Note: When is getting low," or
the LED is "Headset battery is
blinking in getting low. Change
Low Battery headset battery now."
mode, no
other LED
pattern is
displayed
unless both
buttons
are held to
power off
the headset.