Belts - Honeywell Vocollect Hardware Reference Manual

Screens relevant to the application loaded onto the voice device will appear once the voice application is running.

Belts

To comply with government safety standards, the device must be used with the Vocollect belt and standard or
scanning device holster.
A700 Belt Specifications
Belt Size
XS
S
M
L
XL
XXL
XXXL
Belt Part
Belt material
®
Velcro
Belt fastener
Using the A730 Scanning Device Holster
A700 devices have two slots that run the length of the body. These can be used to attach the device to a belt.
1. Put the belt on with the clip either on your right or left side.
2. Position the device so that the slots on the top and bottom align with the runners on the clip.
3. Slide the device into the clip until you hear a click.
When you remove the device from the clip, you must apply a small amount of pressure away from you while sliding it
away from the clip.
Figure 17: Connected to a Voice Device
Dimensions
18" - 26" (46cm-66cm)
24" - 32" (61cm-81cm)
28" - 36" (71cm-91cm)
34" - 42" (61cm-107cm)
40" - 48" (102cm-122cm)
46" - 54" (117cm-137cm)
52" - 60" (132cm-152cm)
Specification
Nylon
YKK Hook and Loop
ITW Nexus 127-3200
| Talkman A700 | 76