T5/A500 Adjustable Shoulder Harness - Honeywell Vocollect Hardware Reference Manual

Screens relevant to the application loaded onto the voice device will appear once the voice application is running.

T5/A500 Adjustable Shoulder Harness

To comply with government safety standards, the device must be used with either a Vocollect customized belt and
clip, a Vocollect customized shoulder harness, or a Vocollect belt holder.
T5/A500 Adjustable Shoulder Harness Specifications
Shoulder Strap
Chest Straps (Regular)
Chest Straps (Large)
Putting a Device on a T5/A500 Shoulder Harness
To wear a device using the shoulder harness option, attach the device to an adjustable Honeywell harness with a
specially designed mounting clip (provided with the belt or harness).
Attach the clip to the harness at the beginning of a shift. You can attach the device to and remove the device from the
clip as often as necessary throughout the shift.
Figure 51: T5/A500 Shoulder Harness Properly Worn - Front and Back Views
1. Open the flap on the front of the shoulder harness by unsnapping the two buttons.
2. Slide the flap through the slots on the mounting clip then snap the buttons together.
3. Unbuckle the large loop.
4. Put your left hand through the small loop and slide the harness over your left shoulder.
5. Clip the large loop in front of your chest.
6. Adjust the straps.
Figure 50: Connected to a Voice Device
2" (5 cm) Wide Adjustable Nylon
Two Adjustable Elastic Nylon, 32"-48"(81 cm - 122 cm)
Two Adjustable Elastic Nylon, 41"-66" (104 cm - 167
cm)
| Talkman A500 | 102