Honeywell Vocollect Hardware Reference Manual page 79

Quantity
1
1. Drill the holes required to secure the base to the vehicle. If using the clamp or claw mount, skip this step.
Note: Apply some lubricant (for example, light oil or anti-seize) to the threads of the clamp mount screws.
2. Screw or clamp a base to the location.
3. Attach the other base to the other end of the arm and tighten once in the desired location by turning the locking
lever clockwise.
4. Screw the device holder to the base.
5. Insert a device into the holder.
To prevent vibration, the arm of the mounting bracket should not touch the stem of the ball of the base. In other
words, the arm should not be tilted so far as to have these pieces touching.
Description
Vehicle Mount, Holder/Base Screw On Attachment
| Talkman A700 | 79