Headset Functions And Led Patterns For Srx - Honeywell Vocollect Hardware Reference Manual

Headset Functions and LED Patterns for SRX

Headset Function
Power On
Power Off
Increase volume
Decrease volume
Force disconnect for
manual pairing in
low power mode
Switch to high power
pairing when pairing
in low power mode
has failed
User Action Headset Mode
Hold the Plus (+) and Headset powers on
Minus (-) buttons for and searches for the
one second previously-connected
device. No new
pairing takes place.
Hold Plus (+) and Headset is powered
Minus (-) buttons for off and cannot be
three seconds when used to perform work
headset is powered
on
Press the Plus (+) N/A
button
Press the Minus (-) N/A
button
Hold the Plus (+) and Headset disconnects
Minus (-) buttons for current pairing and
four seconds enters low power
pairing mode
Headset attempts to
pair with the nearest
un-paired Bluetooth
device. Previous
pairing erased from
headset's memory.
With headset in Headset enters high
pairing mode, hold power pairing mode
the Plus (+) and
Headset attempts to
Minus (-) buttons for
pair with the nearest
seven seconds
un-paired Bluetooth
device. Previous
pairing erased from
headset's memory.
LED Pattern
Quick flutter
Solid blue, then turns
off.
Important:
Do not
remove the
battery until
the LED is
off.
N/A
N/A
Constant quick flash:
four flashes per
second (50 ms on,
200 ms off)
Constant flash in
which LED stays lit
longer: about two
flashes per second
(350 ms on, 50 ms
off)
Note: This
mode is
recommended
when pairing
an SRX
headset with
a handheld
device
Note:
Honeywell
does not
| Honeywell Wireless Headsets | 173
Tone
Two high-pitched
tones
Two low-pitched
tones
Current audio gets
louder
Current audio gets
softer
No tone when
entering mode. Three
ascending tones upon
pairing with a device
No tone when
entering mode. Three
ascending tones upon
pairing with a device