Honeywell Vocollect Hardware Reference Manual page 44

Registry Key
Interleaved2of5BarCodeLengthL2
Interleaved2of5BarCodeLengthL3
Interleaved2of5BarCodeLengthMode
Interleaved2of5CheckDigitTransmission
Interleaved2of5UDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Matrix 2 of 5] - Matrix 2 of 5 Symbology Configuration
Matrix2of5Activation
Matrix2of5StartStop
Matrix2of5CodeMark
Matrix2of5BarCodeLengthL1
Matrix2of5BarCodeLengthL2
Matrix2of5BarCodeLengthL3
Matrix2of5BarCodeLengthMode
Matrix2of5UDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\MSI Code] - MSI Code Symbology Configuration
MSIActivation
MSICodeMark
MSICheckDigitVerification
MSIBarCodeLengthL1
MSIBarCodeLengthL2
MSIBarCodeLengthL3
MSIBarCodeLengthMode
MSICheckDigitTransmission
MSIUDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Plessey Code] - Plessey Code Symbology Configuration
PlesseyActivation
PlesseyUnconventionalStop
Default Value Description
0x0 Length value L2. Range is 0x0 to 0xFF (0 to 255).
0x0 Length value L3. Range is 0x0 to 0xFF (0 to 255).
0x0 Length verification mode, where 0 = "L1 is min length", 1
= "L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is
max length".
0x0 Enable transmission of the check digit.
"B2" User-defined symbology identifier. Range is 0-4 characters.
0x0 Enables the MSI Code symbology.
0x0 Enables special ChinaPost mode, where a specific start/stop
is required and the checksum is transmitted.
0x44 A single character inserted before the barcode data to
indicate the symbology.
0x6 Length value L1. Range is 0x0 to 0xFF (0 to 255).
0x0 Length value L2. Range is 0x0 to 0xFF (0 to 255).
0x0 Length value L3. Range is 0x0 to 0xFF (0 to 255).
0x0 Length verification mode, where 0 = "L1 is min length", 1
= "L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is
max length".
"B4" User-defined symbology identifier. Range is 0-4 characters.
0x0 Enables the MSI Code (Modified Plessey) symbology.
0x44 A single character inserted before the barcode data to
indicate the symbology.
0x1 Enables various check digit calculations, where 1 = modulo
10 and 2 = double modulo 10.
0x6 Length value L1. Range is 0x0 to 0xFF (0 to 255).
0x0 Length value L2. Range is 0x0 to 0xFF (0 to 255).
0x0 Length value L3. Range is 0x0 to 0xFF (0 to 255).
0x0 Length verification mode, where 0 = "L1 is min length", 1
= "L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is
max length".
0x1 Enable transmission of the check digit.
"B8" User-defined symbology identifier. Range is 0-4 characters.
0x0 Enables the Plessey symbology.
0x0 Not documented.
| Talkman A700 | 44