Use As High-Flow Display Device - Honeywell DL230 Operating Instructions Manual

70
Display Description
Displayed: Original meter readings of inputs 1 and 2,
Vo1,2 V3,4
main counters of inputs 3 to 4,
current date and time of device,
Format: 9 digits before and 4 digits after decimal point
with short descriptions and units
Displayed: Main counters of inputs 1 and 2
large V1 V2
Format: 8 digits before and 3 digits after decimal point
with input, short descriptions and units
Displayed: Original meter reading of input 1, Main coun-
large Vo1
ter of input 2
V2
Format: 8 digits before and 3 digits after decimal point
with input, short descriptions and units
Displayed: Original meter readings of inputs 1 and 2
large Vo1,2
Format: 8 digits before and 3 digits after decimal point
with input, short descriptions and units

6.5 Use as high-flow display device

The DL230 has an integrated high-load display function and has national
approval.
The following consumption figures are calculated and stored for each of the
four inputs along with timestamps and can be shown on the device when
requested:
the load registered during the current measurement period (VxMPc)
-
the load registered during the previous measurement period (VxMPL)
-
the highest load registered within a measurement period within the current
-
month (VxMPc)
the load registered during the current day (VxDGc)
-
the load registered during the previous day (VxDGL)
-
the highest daily load registered during the current month (VxDGc)
-
The measurement period maximum (VxMPL) and the daily maximum
(VxDGL) of the last 15 months are stored in the monthly archive of the
respective input. The content of this archive can be found under:
Admin  Input x  Monthly Archive Ix
Operation