Mounts For Talkman A700/T5 Vmt; Talkman A500/T5 Vmt Accessories - Honeywell Vocollect Hardware Reference Manual

• Connect the device to the vehicle's wiring system.

Mounts for Talkman A700/T5 VMT

The Screw On Mount is a mounting option that is bolted to a stationary surface on a vehicle.
The Clamp Mount is a mounting option that is clamped to a stationary surface on a vehicle. This can also be bolted to
a stationary surface, if desired.
The Claw Mount is also clamped to a stationary surface, but can be clamped to oddly-shaped or horizontal or vertical
surfaces.
Figure 64: Screw On Mount

Talkman A500/T5 VMT Accessories

The Talkman A500/T5 VMT is designed to be installed using RAM
supplies a mounting bracket for the A500/T5 and mounting hardware from RAM Mounting Systems. Additional
hardware mounting bracket options can be purchased directly from RAM Mounting Systems (www.ram-mount.com)
to customize the installation.
The A500/T5 VMT must be mounted to a sturdy surface.
Figure 67: Screw On Mounting Parts
Figure 65: Clamp Mount
® Mounting Systems hardware. Honeywell
Figure 68: Screw On Mounting
| Talkman T5 Series | 115
Figure 66: Claw Mount